K-Patents SeedMaster 2 - Manual (Page 36)

6 START UP AND USE 36
36
ESCAPE
It is used to return to the MAIN DISPLAY and to clear mistyped numbers.
SOFT KEYS
The 4 soft keys (F1…F4) fill different roles according to their names displayed just above them on the LCD.
They are used in selecting a branch of the selection tree (for example: DISPLAY, SET UP, CONFIG. etc.), in
moving backwards (BACK), and in selecting and accepting a data value or input signal type from an offered
few (CHANGE and ACCEPT).
1
: Selects Instrument No.1. The selected instrument number is backlit.
2 : Selects Instrument No.2. The selected instrument number is backlit.
UP/DOWN ARROW : Selects an item.
LEFT ARROW : One step back on the selection tree.
Moves the cursor left in a trend, or stops it when moving right. Stops
the cursor when moving left.
RIGHT ARROW : Enters the selected item.
Moves the cursor right in a TREND, or stops it when moving left.
Stops the cursor when moving right.
LEFT/RIGHT ARROW : Moves the cursor when entering data.
CHANGE : Modifies the current selection.
ACCEPT : Identical to ENTER (will appear only after a CHANGE).
BACK : One step back on the selection tree.
If used before ACCEPT or ENTER, returns the previous data.
ZOOM : Displays a trend in full size if only one signal is selected in TREND.
ENTER : If 2 signals are selected for TREND, pushing ENTER will ZOOM
Trend 1 to full size. Keying 2 (membrane key) on the keyboard will
ZOOM Trend 2 to full size. Pushing 1(membrane key) will bring
back Trend 1 again (in full size).
SELECT : SELECT a signal for TREND.
DOWN ARROW : Displays a selected TREND of the previous strike down to
Actual - 3.
UP ARROW : Displays a selected TREND of the next strike up to the Actual one.
ACK : ACKNOWLEDGE events.
RESET : Resets the 2 communication error counters.