KIP PrintPro.Net - Manual (Page 89)

KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 89 -
Step Action Illustration
23. HP-RTL Raster Options –
Raster Density – Used to modify
the density level of the
embedded raster image. The
scale range is from 0-100. The
higher the number on the
scale, the darker the image will
be. A density level can also be
keyed into the text field.
Photo Raster - Users have 3
choices of raster dither output
patterns. There is no ‘correct’
setting. Set according to user
preference.
24. Additional Parameters – Allows
for the addition of specific
HPGL switches to be used.
25. Pen Table – This section allows
for the manipulation of specific
pens if desired.
Pen Width by File – Uses the
pen table width provided within
the file as it was created.
Pen Color by File – Uses the pen
color provided within the file as
it was created.
Manual – Allows the user to
manually manipulate a
specific pen or pens by
entering the values for the Pen
Number, Pen Width and Pen
Color.
26. Save – Select “Save” to save
the HPGL Preset or Save
(active) to save the HPGL