KIP PrintPro.Net - Manual (Page 36)

KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 36 -
Component Function
9. Image Expansion
Turn on Image Expansion [check box]
With "Image Expansion" enabled the trail and side edge margin
settings are ignored in the printer. This allows the LED to continue
imaging the drum up to the trail edge and sides of the print.
• The trail edge margin is set from factory to 5mm. (blank
space at trail edge is 5mm)
• When Enabled the productivity of the printer is reduced
because the inner copy gap is increased. This allows the
drum to be cleaned between each print.
• This setting also affects the lead edge and the side
margins of the print, along with the trail edge margin.