KIP PrintPro.Net - Manual (Page 48)

KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 48 -
Component Function
19. Special Modes
Enable Low Temperature Mode [check box]
Enabling this mode will increase the inner copy gap allowing
the fuser to reach proper fuser temperature between each print
• This mode is available on 7770K, 7970K, 770K and 7170K
Enable High Coverage Mode [check box]
High Coverage Mode enabled allows more toner to be
available on the Developer roller during high coverage printing.
• This Mode is available on 7770K and 7970K
Enable H/H Environment Mode [check box]
Enabling this mode will move the media wait position close to
the roll in decks 2 and 4
• This mode is available on 7770K, 7970K and 770K