Hypertherm HD4070 Rev.1 - Manual (Page 62)

INSTALLATION
3-10 HyPerformance HD4070 Instruction Manual
Mount the ignition console assembly
• Mount the ignition console on the gantry (bridge). Allow room to remove the top for servicing. Maximum
length of the leads between the ignition console and the torch is 4.5 m (15 feet).
• Mount the ignition console horizontally, or in the vertical position as shown below.
• 2-torch systems: 2 ignition consoles are required for a 2-torch system.
3
Vertical mounting
Horizontal mounting
4070.19
0
0
4070.21
32 mm / 1.25" 270 mm / 10.63"
32 mm
1.25"
248 mm
9.75"
279 mm
11.0"
7 mm
0.28"