Hypertherm HD4070 Rev.1 - Manual (Page 47)

4070.20A
SPECIFICATIONS
2-8 HyPerformance HD4070 Instruction Manual
Gas console assembly – 078085
• Position the gas console near the cutting table. Allow room to open the top for servicing.
• Venting air is drawn in through fans on both sides and is exhausted through the front of the unit.
• Maximum distance from the power supply should not exceed 46 m (150 feet).
• Maximum distance to the off-valve assembly should not exceed 30.5 m (100 feet).
42.7 kg
94 lb
476 mm
18.75"
578 mm / 22.75"
432 mm
17.0"
295 mm
11.625"
1/4-20
629 mm
24.75"