Storm trysail track – Harken 3811 System A CB & Slider Battcar User Manual
Page 8
System A (CB/slider)
8
Clear of trysail track?
CB/Slider Systems (Slug Mount)
Check Fit of Mounting Slugs/Car
CB cars 57 mm (2
1
/
4
")
Slider cars 35 mm (1
3
/
8
")
67 mm (2 5/8") connector slug must fit feeder opening.
File opening to make longer.
Use halyard with retrieval line to hoist 67 mm (2 5/8") connector slug up mast
to check for burrs in groove.
Mast prebend: May require straightening before installation.
Storm Trysail Track
Cars must clear storm trysail track. Tracks often converge
above spreaders.
Aft face of mast must be flat or convex.
Check fit
11 or
more
Test track: Put mounting slug in groove, track section on mast. Tighten with
screw. Track must be drawn tightly to mast.
Mounting screw must be long enough for mast groove.
If necessary, purchase longer screws.
Warning! Screws need minimum of 5 threads (turns) engaged to hold
track to mast. Turn screw 360° five times after threads engage slug.
- 3812 System A CB & Slider Battcar 3829 System A CB & Slider Battcar 3830 System A CB & Slider Battcar 3831 System A CB & Slider Battcar 3827 System A CB & Slider Battcar 1777 System A CB & Slider Battcar 3828 System A CB & Slider Battcar 3802 System A CB & Slider Battcar 3803 System A CB & Slider Battcar 3804 System A CB & Slider Battcar 3805 System A CB & Slider Battcar 3806 System A CB & Slider Battcar 3808 System A CB & Slider Battcar 3809 System A CB & Slider Battcar 3810 System A CB & Slider Battcar 3824 System A CB & Slider Battcar 3825 System A CB & Slider Battcar 3826 System A CB & Slider Battcar 3807 System A CB & Slider Battcar 2720 System A CB & Slider Battcar