Harken 3811 System A CB & Slider Battcar - Manual (Page 7)

System A (CB/slider) 7
2. Deburr cut.
Slightly round track corners that will slide against mast.
1. Cut special length top track from 2.05 m (6'8 3/4") track.
3. Drill two 5.5 mm (13/64") holes in cut end of track.
Center at 8 mm (5/16") and 27 mm (11/16").
Preassembly – CB System (Slug Mount) Cut Top Track to Length
8 mm ( 5 /
16
" )
27 mm
(1 1 /
16
")
Short top track lengths
41 mm (1 5 /
16
") Use existing hole. Do not drill
second hole.
52 mm (2 1 /
16
") Use existing hole, drill hole
5 /
16
" (8 mm) from cut end.