Grip Factory Munich GF-8 - Manual (Page 54)

GF-8 Xten Crane System Instruction Manual
Page: 53
The GF-8 Double Ended Connected Steering Base
Offers all the features of the standard base but with GFM’s connected steering system.
The 3 steering functions are controlled from the rear of the dolly by simply flicking a lever.
You can roll from floor to standard 62cm /24,5“ track by just clicking on the track wheels.
Levelling legs and adapters to 100cm / 39“ track are also available. Provides the utmost in
manoeuvrability.
Three steering modes available:
o Front 2 wheel
o 4 wheel inverted
o Rear 2 wheel
To change steering mode please observe the following guidelines:
o Before switching, all wheels must be aligned.
o To position the switch lever in the required position first release the safety knob
(see the pictures below), found on the opposite side. After switching, reinsert the
safety knob (Steering position secured).
Safety knob
Dolly Double Ended Connected Steering
Switch lever (here in the upward position)