Grip Factory Munich GF-8 - Manual (Page 53)

GF-8 Xten Crane System Instruction Manual
Page: 52
GF-8 Crane Dollies
The GF-8 Mini Base
Ideal for going through narrow doorways
and working in very confined spaces. Track
wheels are mounted by replacing the
standard rubber wheels, keeping size to a
minimum. Levelling legs are also available.
For use with Standard GF-8 versions.
GF-8 Base as Track or Western Dolly
The crane platform may be mounted on the
base dolly to provide a track or western
dolly style function. Insert the 3 bolts
located on the underside of the chassis
through the platform and into the turnstile
mount. Lock the 3 bolts tightly with an Allen
Key.
The GF-8 Standard Base Dolly
Equipped with solid rubber wheels and with
single ended, corrected steering geometry
allowing a minimum circular movement of
258cm / 9' 4" inside diameter. Can roll from
floor to standard 62cm /24,5“ track by just
clicking on the track wheels. Levelling legs
and adapters to 100cm / 39“ track are also
available.
The GF-8 Double Ended Steering Base
offers all the features of the standard base
but with double ended steering. Each end
functions independently with a dedicated
steering rod for each operator. Can roll from
floor to standard 62cm /24,5“ track by just
clicking on the track wheels. Levelling legs
and adapters to 100cm / 39“ track are also
available.
Attention: The assembly or operation of the crane only with
pneumatic wheels is not allowed. The only exception
is when the levelling legs are mounted and the base
is levelled and supported by them. In general the
pneumatic wheels are only for transportation.