Grip Factory Munich GF-8 - Manual (Page 19)

GF-8 Xten Crane System Instruction Manual
Page: 18
Version 11
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)
Front extension arms required 2 x 150 cm / 5’
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 564 cm / 18’ 6”
Maximum Euro-adapter height 483 cm / 15’ 10“
Lift capacity 216 kg / 475 lbs
Counterweight required for max. load 480 kg / 1056 lbs
Counterweight required to balance empty arm 46 kg / 101 lbs
Crane weight (excluding dolly and weights) 190 kg / 418 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 401 cm / 13’ 1“
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 11 is assembled in the same manner as version 3.
Version 12
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)
Front extension arms required 2 x 150 cm / 5’ + 100 cm / 3’ 3”
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 727 cm / 23’ 9”
Maximum Euro-adapter height 564 cm / 18’ 6“
Lift capacity 150 kg / 330 lbs
Counterweight required for max. load 480 kg / 1056 lbs
Counterweight required to balance empty arm 88 kg / 176 lbs
Crane weight (excluding dolly and weights) 202 kg / 444 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 498 cm / 16’ 4“
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 12 is assembled in the same manner as version 4.
Version 13
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)