Grip Factory Munich GF-8 - Manual (Page 18)

GF-8 Xten Crane System Instruction Manual
Page: 17
Attention: The following versions 9 to 16 require a 127cm / 4’ 2” section to the rear
i.e. Counterweight Bucket End.
The 30cm / 1ft Column Extension is also required to achieve a pivot
height to 184cm / 6ft. See page 4.
Version 9
(Pivot height 184cm / 6ft, Rear Extension 127cm / 4’ 2”)
Front extension arms required 1 x 150 cm / 5’
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 319 cm / 10’ 5”
Maximum Euro-adapter height 361 cm / 11’ 10“
Lift capacity 250 kg / 550 lbs
Counterweight required for max. load 276 kg / 607 lbs
Counterweight required to balance empty arm 0 kg / 0 lbs
Crane weight (excluding dolly and weights) 160 kg / 352 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 253 cm / 8’ 3“
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 9 is assembled in the same manner as version 1.
Version 10
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)
Front extension arms required 1 x 150 cm / 5’ + 100 cm / 3’ 3”
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 481 cm / 15’ 9”
Maximum Euro-adapter height 442 cm / 14’ 5“
Lift capacity 250 kg / 550 lbs
Counterweight required for max. load 456 kg / 1003 lbs
Counterweight required to balance empty arm 28 kg / 61 lbs
Crane weight (excluding dolly and weights) 184 kg / 404 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 351 cm / 11’ 5“
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 10 is assembled in the same manner as version 2.