Grip Factory Munich GF-8 - Manual (Page 50)

GF-8 Xten Crane System Instruction Manual
Page: 49
Accessories for GF- 8 crane
Levelling leg Monitor carrier
Push bar Track wheel with brake
Mounting the accessories
Levelling Legs:
Crank the spindle up to give enough clearance to connect the levelling arm to the dovetail
connection on the base dolly. To do so, pull back the locking pin which is arranged on the
levelling leg adapter of the base dolly and slip the connection flanges into each other.
Ensure that the automatic locking pin inserts fully. When all 4 Levelling Legs are mounted
the base can be levelled.
Monitor Carrier:
Insert the monitor carrier axle through the respective holes on the pivot section and secure
with the knurled locking knobs.
Push Bar:
Can be connected to either end on the base dolly by inserting the push bar stubs into the
respective holes on the base. Lock tightly with the locking knobs.
Track Wheels:
Connect to the track wheel units to the bolts on the underside of the base. Ensure that the
automatic locking pin inserts fully. Mount the track wheels so that the track wheel brake on
each of the units as well as the automatic locking pin points towards the mounting column.