Grip Factory Munich GF-8 - Manual (Page 48)

GF-8 Xten Crane System Instruction Manual
Page: 47
Accessories for GF-8 Crane platform weight list
Qty. Description Weight kg Weight lbs
1 Seat arm combined 10cm / 4" AL-2210 0,75 kg 1,65 lbs
1 Seat arm combined 20cm / 8" AL-2220 1,15 kg 2,53 lbs
1 Seat arm combined 30cm / 12" AL-2230 1,60 kg 3,52 lbs
1 Seat arm vertical 10cm / 4" AL-2211 1,25 kg 2,75 lbs
1 Seat arm vertical 20cm / 8" AL-2212 1,75 kg 3,85 lbs
1 Seat arm vertical 30cm / 12" AL-2213 2,20 kg 4,84 lbs
1 Connection pin AL-2240 0,40 kg 0,88 lbs
1 Crane seat with seat belt AL-1030 7,20 kg 15,84 lbs
1 Riser 10 cm / 4" AL-2310 2,80 kg 6,16 lbs
1 Riser 20cm / 8" AL-2320 2,95 kg 6,49 lbs
1 Riser 30cm / 12" AL-2330 3,40 kg 7,48 lbs
1 Riser 40cm / 16" AL-2340 3,80 kg 8,36 lbs
1 Riser 50cm / 20" AL-2350 4,25 kg 9,35 lbs
1 Ball Adapter AL-2150 2,17 kg 4,77 lbs
Attention: The safety belts provided must be fastened upon sitting
down and kept fastened at all times when on the platform.
Only original GFM seats, seat arms, risers etc may be used.
Working load capacity = Camera operator / operators +
camera + accessories
We recommend that the camera and remote head are
additionally secured to the remote head mount with a
safety cord.
Place the required amount of counterweights in the weight bucket so that the crane arm
becomes balanced and remains in the horizontal position. If necessary, the crane can be
fine balanced by adjusting the sliding weight on the rear parallelogram at the weight
bucket. Do not forget to lock the sliding weight in position before tilting the arm.
The counterweight bucket door must be locked when operating the crane.
Unloading
Attention: The counterweights must always be gradually removed
from the counterweight bucket before personnel leave the
platform.
When the weights are removed, the platform personnel
should dismount one at a time. Extreme caution must be
given to the shifting payload at all times. When dismantling
the crane it is essential that the whole platform is
supported fully by a stable underlay i.e. rostrum or ground
surface. In any case the platform should not be in the air
without support.