Grip Factory Munich GF-8 - Manual (Page 20)

GF-8 Xten Crane System Instruction Manual
Page: 19
Front extension arms required 3 x 150 cm / 5’
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 809 cm / 30’ 7”
Maximum Euro-adapter height 606 cm / 19’ 10“
Lift capacity 128 kg / 281 lbs
Counterweight required for max. load 480 kg / 1056 lbs
Counterweight required to balance empty arm 112 kg / 246 lbs
Crane weight (excluding dolly and weights) 208 kg / 457 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 549 cm / 18’
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 13 is assembled in the same manner as version 5.
Version 14
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)
Front extension arms required 3 x 150 cm / 5’ + 100 cm / 3’ 3”
Rear extension arm required 1 x 127 cm / 4’ 2”
Lift range 891 cm / 31’ 10”
Maximum Euro-adapter height 705 cm / 23’ 1“
Lift capacity 80 kg / 176 lbs
Counterweight required for max. load 420 kg / 924 lbs
Counterweight required to balance empty arm 140 kg / 308 lbs
Crane weight (excluding dolly and weights) 210 kg / 462 lbs
Dolly weight 80 kg / 176 lbs
Arm reach (pivot to camera head mount) 663 cm / 21’ 8“
Length of rear end (pivot to outside of bucket) 220 cm / 7’ 2“
Assemble the GF-8 Column Extension as per the instructions on page 4.
The GF-8 version 14 is assembled in the same manner as version 6.
Version 15
(Pivot height 184cm / 6ft, Standard Rigging Harness, Rear Extension 127cm / 4’ 2”)