Greenheck Microprocessor Controller (475595 IOM) TAP v2.10 April 2014 (RVE, ERCH-01, ERT-01) User Manual
Page 25
T
HIS
SCREEN
ALLOWS
THE
USER
TO
OVERRIDE
THE
HOT
GAS
REHEAT
OPERATION
.
This screen only appears if On/Off hot gas reheat option was provided with the
unit.
When the Hot Gas Reheat Loop Control is in the MANUAL mode, us the arrow
buttons to turn the hot gas reheat ON or OFF.
HotGas Reheat Override
Hot Gas Reheat
Loop
Control: Auto
Reheat:
OFF
T
HIS
SCREEN
ALLOWS
THE
USER
TO
OVERRIDE
THE
HOT
GAS
REHEAT
OPERATION
.
This screen only appears if modulating hot gas reheat option was provided with
the unit.
When the Hot Gas Reheat Loop Control is in the MANUAL mode, use the arrow
buttons to vary the reheat output.
HotGas Reheat Override
Hot Gas Reheat
Loop
Control: Auto
Reheat:
100%
T
HIS
SCREEN
ALLOWS
THE
USER
TO
OVERRIDE
THE
POSITION
OF
THE
OUTDOOR
AIR
DAMPER
.
This screen only appears if the unit is equipped with a modulating outdoor air
damper.
0% Open = Outdoor air damper closed
100% Open = Outdoor air damper fully open
OA/RA Damper Override
Outdoor Damper
Loop
Control:
Auto
Open: 0%
T
HIS
SCREEN
ALLOWS
THE
USER
TO
OVERRIDE
THE
SUPPLY
FAN
VFD
SPEED
.
This screen only appears if the unit is equipped with a supply fan VFD controlled
by the microprocessor.
The Speed is the proportional percentage of the analog output from the controller
to the VFD.
0% Speed = Min Speed (determined by VFD)
100% Speed = Max Speed (determined by VFD)
(See unit Installation and Operation Manual for VFD programming).
Supply VFD Override
Supply Fan VFD
Loop
Control:
Auto
Speed: 0%
(0%=Min Speed by VFD)
T
HIS
SCREEN
ALLOWS
THE
USER
TO
OVERRIDE
THE
EXHAUST
FAN
VFD
SPEED
.
This screen only appears if the unit is equipped with a exhaust fan VFD controlled
by the microprocessor.
The Speed is the proportional percentage of the analog output from the controller
to the VFD.
0% Speed = Min Speed (determined by VFD)
100% Speed = Max Speed (determined by VFD)
(See unit Installation and Operation Manual for VFD programming).
Exhaust VFD Override
Exhaust Fan VFD
Loop
Control:
Auto
Speed: 0%
(0%=Min Speed by VFD)
25
DDC Controller for Tempered Air Products
®