Grandstream GXV3240 Administration Guide - Manual (Page 91)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 89 of 117
MAINTENANCE/SYSLOG
Syslog Server
It is used to configure the URI which the phone system will send the
syslog messages to.
The default setting is "log.ipvideotalk.com".
Syslog Level
It is used to selects the level of logging for syslog. The default setting
is "None". There are 4 levels from the dropdown list: DEBUG, INFO,
WARNING and ERROR. The following information will be included in
the syslog packet:

DEBUG (Sent or received SIP message, )

INFO (Product model/version on boot up, NAT related info, SIP
message summary, Inbound and outbound calls, Registration
status change, Negotiated codec, Ethernet link up)

WARNING (SLIC chip exception)

ERROR (SLIC chip exception, Memory exception)
Send SIP Log
This is used to configure whether the SIP log will be included in the
syslog messages. T he default setting is “No”.
MAINTENANCE/LOGCAT
Clear Log It is used to clear the log files saved in the phone system.
Log Tag It is used to configure the filter to display the specified process log file.
Log Priority
It is used to select the log priority to display. It can be selected from

Verbose

Debug

Info

Warn

Error

Fatal

Silent (suppress all output)
The default setting is “Verbose”.
Get Log Click it display the log file on the web page.
MAINTENANCE/DEBUG
Capture Trace
Click the START to start capturing a trace, and press STOP to stop the
capture process.
Trace List
It is used to list the captured files in the drop down box. Click the
"Delete" button to delete the selected trace.