Upgrading and provisioning, Upgrade and provisioing configuration, Figure 15: gxv3240 upgrade configuration via lcd – Grandstream GXV3240 Administration Guide User Manual
Page 105

Firmware Version 1.0.3.37
GXV3240 Administration Guide
Page 103 of 117
UPGRADING AND PROVISIONING
GXV3240 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
UPGRADE AND PROVISIOING CONFIGURATION
There are two ways to setup upgrade and provisioning on GXV3240. They are Keypad Menu and Web GUI.
Configure via keypad Menu
In GXV3240 Settings, select Advanced Settings->Upgrade. Users may then select the upgrade mode
and enter the IP address or FQDN for the Firmware server and the Config server. After making the
changes, tap Save button to save the change. Then reboot the phone.
Figure 15: GXV3240 Upgrade Configuration via LCD
Configure via Web GUI