Grandstream GXV3240 Administration Guide - Manual (Page 40)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 38 of 117
Figure 10: GXV3240 UCM Auto Config Number - Select Registering Numbers
Figure 11: GXV3240 UCM Auto Config Number - Enabling Registering Number

Upgrade
 Upgrade Mode: This field allows the user to choose the firmware upgrade method: TFTP, HTTP
or HTTPS.
 Firmware Upgrade and Provisioning: Defines the rules for automatic upgrade: Always Check at
bootup, when F/W pre/suffix changes, Skip the Firmware Check.
 HTTP/HTTPS User Name: The user name for the HTTP/HTTPS server if set up on the server side.
 HTTP/HTTS Password: The password for the HTTP/HTTPS server if set up on the server side.
 Firmware Server Path: This defines the server path for the firmware server. It can be different from
the configuration server for provisioning.
 Config Server Path: This defines the server path for provisioning. It can be different from the