Grandstream GXV3240 Administration Guide - Manual (Page 39)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 37 of 117
DATE & TIME

Enable and Use Specified NTP Server Address. Assign the URL or IP Address of NTP Server.

Set date. Set the current date for the GXV3240.

Set time. Set the time on the GXV3240 manually.

Select time zone. Select time zone for the GXV3240.

Set time. Set the current time for the GXV3240.

Use 24-hour format. Check/uncheck to display the time using 24-hour time format or not. For example,
in 24-hour format, 13:00 will be displayed instead of 1:00 pm.

Choose date format. Select the format of year, month and day for the date to be displayed.
ABOUT PHONE
About Phone lists the GXV3240's SIP account information, network status and system information.

Account Status. Displays the account name and registration status on the GXV3240.

Network Status. Displays MAC Address, Address Type, IP Address, Subnet Mask, Default Gateway,
DNS Server, Alternative DNS server, NAT Type and VPN IP if any.

System Information. Displays the Android version, system version, recovery version, u-boot version,
kernel version, hardware version and CPE version of the GXV3240. The system version is the firmware
version for the GXV3240.
ADVANCED SETTINGS

Account
 Configure SIP account's registration information. Tap on one account and fill in the necessary
information to register the account, which includes Account Active, Account Name, SIP Server,
SIP User ID, SIP Auth ID, SIP Auth Password, Voice Mail User ID and Display Name.
 GXV3240 supports UCM Auto Config Number feature. This feature allows the Grandstream
UCM, located in the same network, automatically to assign accounts and to register them to
GXV3240.