Grandstream GXV3240 Administration Guide - Manual (Page 88)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 86 of 117
Configuration config file includes all the P value parameters for phone's current
settings except password for security purpose. Users can use the
Grandstream configuration file generator to generate binary config file
from this text file.
Upload Device Configuration It is used to click BROWSE to upload configuration file to the phone.
Configuration via Keypad
Menu
It is used to set the end user’s right to access the Settings from LCD
screen. There are two different options: Unrestricted and Basic
settings only. If the phone enables the Basic settings only, the
Advanced settings options in Settings will be hidden.
Authenticate Conf File
It is used to set if the phone system authenticate the configuration file
before applying it. If it set to “Yes”, the configuration file must include
value P1 with phone system’s administration password. If it is missed
or does not match the password, the phone system will not apply it.
The default setting is “No”.
XML Config File Password
It is used to decrypt the XML configuration file which is encrypted by
OpenSSL. The default setting is keep this field blank.
Always send HTTP Basic
Authentication Information
It is used to set if the phone system includes the credential information
in the HTTP/HTTPS request messages to download the cfg.xml file. If
it is set to “Yes,” the credential information will always be included in
the HTTP/HTTPS messages regardless the s erver’s challenge. The
default setting is “No”.
Validate Certification Chain
It is used to configure whether to validate the server certificate when
download the firmware/config file. If it is set to "Yes", the phone will
download the firmware/config file only from the legitimate server. The
default setting is "No".
HTTP/HTTPS User Name
It is used to type the user name for HTTP/HTTPS server
authentication.
HTTP/HTTPS Password It is used to type the password for HTTP/HTTPS server authentication.
Upgrade Via
It is used to set the upgrading protocols for the phone system.
It can be selected from TFTP, HTTP, HTTPS and Manual Upload. If
Manual Upload is selected, it can upload the firmware file via the
browser.
Firmware Server Path
It is used to define the server path for upgrading the firmware. It allows
to be different from the Config Server Path.
Config Server Path
It is used to define the server path for upgrading the configuration file.
It allows to be different from the Firmware Server Path.
Firmware File Prefix
It is used to set the prefix characters for the firmware files. If it is
configured, only the firmware with the matching encrypted prefix will