Grandstream GXV3240 Administration Guide User Manual
Page 103

Firmware Version 1.0.3.37
GXV3240 Administration Guide
Page 101 of 117
+18
+24
The default setting is 0dB.
RJ9 Headset RX Gain (dB)
It is used to set the Receive Gain in RJ9 headset channel. It can be
selected from the dropdown list:
0
-6
+6
The default setting is 0dB.
Headset Type
It is used to set which type of head set is connected to the phone
system. It can be selected from the dropdown list:
Normal Headset
Plantronics EHS
If a normal RJ11 headset
is connected, it should set to “Normal
Headset”. If a Plantronics EHS headset or Jabra EHS headset is used,
it should set to “Plantronics EHS”.
Headset Key Mode
When headset is connected to the phone, users could use the
HEADSET button in two different modes:
1. Default Mode
When the phone is in idle, press HEADSET button to offhook
the phone and make calls by using headset. Headset icon will
display on the top of the call screen in dialing/talking status;
When there is an incoming call, press HEADSET button to pick
the call by using headset;
When there is an active call using headset, press HEADSET
button to hang up the call;
When Speaker/Handset is used in dialing/talking status, press
HEADSET button to switch to headset. Press it again to hang
up the call, or press Speaker/Handset to switch back to
previous mode.
2. Toggle Headset/Speaker
When the phone is in idle, press HEADSET button to switch to
Headset mode. The idle screen will display a Headset icon. In
this mode, if pressing Speaker button or entering digits,
headset will be used by default;
When there is an incoming call, press Answer icon on the
screen or Speaker button, headset will be used;