Grandstream GXV3240 Administration Guide - Manual (Page 24)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 22 of 117
pad when picking up the parked call. This is used when "Special Mode" is set to "Broadsoft" (from
web UI or provisioning) and "Enable SCA" is set to "Yes".

Seize Line Timeout (s): Configure the timeout before the line can be seized (in seconds) when
using shared line. The default setting is 15 seconds. For Shared Call Appearance, phone must
send a SUBSCRIBE-request for the line-seize event package whenever a user attempts to take
the shared line off hook. “Line Seize Timeout” is the line-seize event expiration timer.

Call Forwarding
The incoming call to this SIP account can be forwarded to another number using different rules as
configured here.
 None: Call forwarding feature is disabled. This is the default setting.
 Unconditional: Forward all calls to a particular number.
 Time based: Set the time range and number to be forwarded to. In this time range, calls are
forwarded to the number specified in "In Time Forward To"; out of this time range, calls are
forwarded to the number specified in "Out Time Forward To".
 Others: When the phone is busy, calls are forwarded to the number specified in "Busy To"; when
incoming calls are not answered, the calls are forwarded to the number specified in "No Answer
To"; the waiting time for answering calls is specified in "No Answer Timeout (s)".

Full-screen video calling
Set to automatically enable the fullscreen video call mode for inbound and outbound video calls.
WIRELESS & NETWORK
Users can configure Ethernet settings, Wi-Fi, Bluetooth, VPN, PPPoE and other advanced network settings
here.
ETHERNET SETTINGS
Configure DHCP, Static IP or PPPoE to for the phone to access network via Ethernet settings.

If DHCP is selected, the phone will get IP address automatically from the DHCP server in the network.
This is the default mode.

If Static IP is selected, enter the information for IP Address, Subnet Mask, Default Gateway, DNS
Server and Alternative DNS server.

If PPPoE is selected, enter PPPoE Account ID and PPPoE Password provided from the PPPoE server