Gasboy Cenex - Manual (Page 13)

Site Controller Cenex Configuration
12/08/03 1-7
PRODUCT CODES
You can enter up to 99 product codes. Use LOAD PRODUCT to enter product codes and names.
See the Manager’s Manual for more information about entering products.
The table below gives the standard Cenex product codes. Note that product code 9 is usually
used for diesel. Always load fuel in category 1.
Prod. Code Category Product Name
1 1 Regular
2 1 Premium Unleaded
3 1 Gasohol or Super Unleaded
4 1 Unleaded
5 1 Diesel #1
6 1 Diesel #2
7 1 Kerosene
8 1 Diesel - Farm
9 1 Diesel
NOTES: See the appropriate Buypass or NBS Credit and Debit Card Network manual for
special instructions on product names.
When assigning categories, remember that categories 1 through 10 are used when
keeping track of patronage totals for sites running Buypass. There are no restrictions
when running NBS.
CENEX LOCAL CARD FORMAT
Cenex Local cards use a format that is different from the standard GASBOY club card format.
The Cenex card format is given below.
00ssssssnnnnnnnnnncccc#yymm#taallrp00
00 to indicate this is a non-bank card (encoded as zeros)
ssssss is a six-digit system ID
nnnnnnnnnn is a 10-digit customer number
cccc is a four-digit card number
# is a field separator
yymm is the expiration date
yy last two digits of year
mm two-digit month
# is a field separator
t Cenex card type indicator
0 local card
aa two-digit authorization code
ll two-digit limitation code
r restriction code (see table on next page)
p price level
0 Cenex Regional convenience card price
1 local retail price
2 local price
00 two digits for future expansion (encoded as zeros)