Evacuation, barricading and shut-off, Read this manual, Follow the regulations – Gasboy M04230K00X User Manual
Page 15: Safety symbols and warning words, Alert symbol, Signal words
![background image](https://www.manualsdir.com/files/787371/content/doc015.png)
MDE-4282B Gasboy Pulser Kits M04230K00X Installation • July 2005
Page 15
Important Safety Information
Evacuation, Barricading and Shut-Off
Any procedures requiring accessing the pump/dispenser or STPs requires the following three
actions:
•
An evacuation of all unauthorized persons and vehicles
•
Using safety tape or cones as barricades to the effected units
•
A total electrical shut-off of that unit
Read this Manual
Read, understand and follow this manual and any other labels or related materials supplied
with this equipment. If you do not understand a procedure, call a Gilbarco Authorized Service
Contractor or call the Gilbarco Support Center at 1-800-800-7498. It is imperative to your
safety and the safety of others to understand the procedures before beginning work.
Follow the Regulations
There is applicable information in: NFPA 30A: Automotive and Marine Service Code; NFPA
70: National Electrical Code (NEC); OSHA regulations; and federal, state, and local codes
which must be followed. Failure to install, inspect, maintain or service this equipment in
accordance with these codes, regulations and standards may lead to legal citations with
penalties or affect the safe use and operation of the equipment.
Safety Symbols and Warning Words
This section provides important information about warning symbols and boxes.
Alert Symbol
This safety alert symbol is used in this manual and on warning labels to alert you to
a precaution which must be followed to prevent potential personal safety hazards. Obey safety
directives that follow this symbol to avoid possible injury or death.
Signal Words
These signal words used in this manual and on warning labels tell you the seriousness of
particular safety hazards. The precautions that follow must be followed to prevent death,
injury or damage to the equipment
• DANGER - This signal word is used to alert you to a hazard to unsafe practice which will
result in death or serious injury
• WARNING - This alerts you to a hazard or unsafe practice that could result in death or
serious injury.
• CAUTION with Alert symbol - This signal word designates a hazard or unsafe practice
which may result in minor injury.
• CAUTION without Alert symbol - When used by itself, CAUTION designates a hazard
or unsafe practice which may result in property or equipment damage.