Fluke Biomedical DataSim 6100 - Manual (Page 39)

Operation
Introduction
2
2-3
Introduction
The following describes procedures for using the Simulator to demonstrate and
train in situations that healthcare professionals experience on a daily basis.
Such situations include normal and abnormal blood pressures, arrhythmias,
and defibrillation.
Size Adjustments
The Size Adjust function, Special Function 54, lets the user adjust the
waveform size up or down from the STD level. This function is intended for
in-service and demonstration applications when size adjustments may be
helpful in demonstrating a clinical situation, such as increasing the PA wedge
pressure to simulate LV heart failure. Table 2-1 lists waveform amplitudes for
each channel.
Table 2-1. Waveform Amplitudes
Channel Parameter
1 ECG
2 ART
3 PA
4 RA
5 AUX
6 RESP
To adjust the size of a waveform channel:
1. Using the keypad, press SPEC FUNC , followed by the numbers 54 . The
keypad briefly displays:
SIZE