Fluke Biomedical 2MF Index - Manual (Page 58)

Index 2MF
Users Guide
8-8
Configuring the Program
From the Sequence menu, re-configure the parameters and values in a program, which
may include everything from BPM to oximeter model being tested; this section details
resetting those program’s values and parameters.
1. Press ADV to begin defining your program.
esl091.eps
Note
At any time during the program-definition process, you can press esc and
return to this initial Sequence screen. (Pressing
esc at the Sequence
screen returns you to the Autosequences menu and will prompt you to save
or not save your program; from there, pressing
esc returns you to the
Main menu.)
Selecting Print Settings
You can customize a program to include optional heading and actuals information at print
time with the following procedure:
1. Press SEL to toggle the Print Heading? from No to Yes.
esl092.eps
2. Move to the next step in the process by pressing ADV:
esl093.eps
You can then set whether or not you want to print the actuals. Actuals refer to the
observed test data. If you select not to have actuals printed, you will see summary
information only.
Note
For information on a test printout, headings, and actuals, refer to
“Appendix A: Data Transfer Notes”.