Fluke Biomedical 2MF Index - Manual (Page 27)

The Main Menus
The Main Menu 2
4
4-3
fgg013.eps
The CUST menu options are for creating custom makes by choosing a light technology
and R-Curve. This custom make can be stored for later use. Custom makes are used when
the pulse oximeter being tested is not in the factory preset makes.
The Main Menu 2
The softkey more toggles between Main Menu 1 and Main Menu 2. Main Menu 2
allows you to select a pulse oximeter type by make, configure the Simulator serial
(RS232) port, and adjust the contrast of the LCD screen.
fgg161.eps
The choices available at the Main Menu 2 include:
•
AUTO to create and run tailored test procedures
•
UTIL to change the display and configure the RS232
•
OPTS to open the Advanced Options menu
•
MAKE to select the pulse oximeter being tested
•
more to toggle Main Menu 1
Each of these Main Menu choices is discussed separately in the next few chapters.
Note
Pressing esc at any point within the Simulator will always return you to
any previous menu, until you have returned to Main Menu 1 or 2.