Fluke Biomedical 2MF Index - Manual (Page 39)

Setting and Changing Simulation Factors
Using Preset Patient Conditions
6
6-5
Table 6-2. Level 0 Presets
Motion
Preset Name Saturation
Pulse
Rate
Signal
Strength
Saturation Frequency Amplitude
[presets#]
Normal 98 % 55 BPM 5.0 % - - 0 % 00
Normal/ Tap 98 % 55 BPM 5.0 % 78 % 2.5 Hz 7 % 01
Normal/ Shiver 98 % 55 BPM 5.0 % 78 % 6.0 Hz 15 % 02
Weak Pulse 90 % 95 BPM 0.65 % - - 0 % 03
Weak Pulse/
Tap
90 % 95 BPM 0.65 % 60 % 4.3 Hz 1 % 04
Weak Pulse/
Shiver
90 % 95 BPM 0.65 % 60 % 6.0 Hz 3 % 05
Bradycardia 88 % 45 BPM 5.0 % - - 0 % 06
Brachycardia/
Shiver
88 % 45 BPM 5.0 % 68 % 6.0 Hz 10 % 07
Hypoxic 70 % 95 BPM 2.0 % - - 0 % 08
Hypoxic/ Tap 70 % 95 BPM 2.0 % 50 % 4.3 Hz 3 % 09
Hypoxic/
Shiver
70 % 95 BPM 2.0 % 50 % 6.0 Hz 8 % 10
Neonate 90 % 180 BPM 1.0 % - - 0 % 11
Neonate
/Shiver
90 % 180 BPM 1.0 % 70 % 6.0 Hz 5 % 12
Tachycardia 85 % 130 BPM 1.2 % - - 0% 13
Geriatric 92 % 95 BPM 2.4 % - - 0 % 14
Obese 93 % 90 BPM 3.0 % - - 0 % 15
Brady Tap #2 88 % 45 BPM 5.0 % 96/100 % 3.9 Hz 0/4 % 16
Hypox Tap #2 70 % 95 BPM 2.0 % 96/100 % 4.3 Hz 0/3 % 17
Weak Tap #2 80 % 95 BPM 0.9 % 96/100 % 3.6 Hz 0/1 % 18
Normal Tap #2 93 % 55 BPM 5.0 % 96/100 % 2.5 Hz 0/3 % 19
Asystole 91 % 90 BPM 2.0 % 96/98 % 1.1 Hz 0/1.1 % 20
LowFreq1 80 % 75 BPM 1.0 % 93/97 % 0.5 Hz 0/4.2 % 21
LowFreq2 70 % 75 BPM 1.0 % 96/100 % 0.5 Hz 0/4.2 % 22
Slow Tap 80 % 75 BPM 1.0 % 96/100 % 2.0 Hz 0/3.0 % 23
Note
When presets with tap or shiver are selected, there is a 10-second delay
before the motion simulation starts.This delay will prevent an oximeter
from "locking on" to patient parameters from a previous simulation.
The Simulator is preset to simulate the SpO2 and pulse rate ratios.
1. Access the Simulations menu by pressing the softkey SIM in Main Menu 1.