Fluke Biomedical 2MF Index - Manual (Page 53)

Using Test Programs
The AUTO Menus
8
8-3
Table 8-1. Auto Test Parameters (cont.)
Name Description
Make Set the make of machine being tested, such as Nellcor, HP,
Criticare, Ohmeda, Invivo Research, and so on.
O2 Alarm Test Set the Simulator to either test or bypass the SpO2 limits test.
BPM Alarm Test Set the Simulator to either test or bypass the BPM units test. If
Yes , an alarm will sound at the conclusion of testing the pulse
rate.
Pulse Amplitude Test Set the Simulator to either test or bypass the amplitude test.
Motion Test Set the Simulator to test the oximeter for patient motion.
Use Presets Set the Simulator to allow for the selection of preset patient
conditions (geriatric, obese, normal, etc.) at test time.
Accessing the Autosequences Menu (AUTO)
To access the Autosequences menu, press more on Main Menu 1 and then press AUTO
on Main Menu 2. See the section “Creating a Custom Test Program” for the additional
parameters available under each option.
fgg181.eps
After you press AUTO , the following options become available:
esl075.eps
The Autosequences menu provides the following options:
•
PROG to define and edit programs
•
RUN to start an autosequence
•
DEFS to restore defaults
•
esc to return to prior menus