Fluke Biomedical ESA615 - Manual (Page 32)

ESA615
Users Manual
18
Set the Date
From the setup menu, push  or  until the Date value
is highlighted.
1. Push
 .
2. In the keyboard screen, push  or  to move the
highlight to a character.
3. Push  .
4. Do steps 2 and 3 again until the date is complete.
5. Push
the Done softkey.
Note
Push the Backspace softkey to delete the last
character in the date field.
Set the Time
1. From the setup menu, push  or  until the Time
value is highlighted.
2. Push  .
3. In the Keyboard screen, push  or  to move the
highlight to a character.
4. Push  .
5. Do steps 3 and 4 again until the time is complete.
Note
When you set the time for 12-hour format, push
the am/pm softkey to set AM or PM.
6. Push the Done softkey.
Note
Push the Backspace softkey to delete the last
character in the date field.
Set the Test Standard
1. From the setup menu, push  or  until the
Standard variable is highlighted.
2. Push  .
3. Push  or  to highlight one of the standards.
4. Push  .
Set the GFCI Limit
To set the GFCI current limit:
5. From the setup menu, push  or  until the GFCI
Limit variable is highlighted.
6. Push  .
7. Push  or  to highlight one of the preset GFI
current values.
8. Push  .