Fluke Biomedical ESA615 - Manual (Page 15)

1
Electrical Safety Analyzer
Introduction
 Warning
To prevent possible electrical shock, fire, or
personal injury, read all “safety information”
before you use the Product.
The Fluke Biomedical ESA615 Electrical Safety Analyzer
(the Product) is a full-featured, compact, portable
analyzer, designed to verify the electrical safety of
medical devices. The Product tests to domestic
(ANSI/AAMI ES1, NFPA 99) and international (IEC62353,
AN/NZS 3551, and parts of IEC 60601-1) electrical-safety
standards. The Product simulates ECG to do
performance tests on ECG monitors.
The integrated ANSI/AAMI ES1 and IEC60601-1 patient
loads are easily selectable.
The Product does these tests:
• Line (Mains) voltage
• Ground Wire (Protective Earth) resistance
• Equipment current
• Insulation resistance
• Ground (Earth) leakage
• Chassis (Enclosure) leakage
• Lead to Ground (Patient) and Lead to Lead (Patient
Auxiliary) leakage
• Lead isolation (Mains on applied parts leakage)
• Differential leakage