Flowserve MX Limitorque - Manual (Page 38)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
30
STEP 5
a CAUTION: (MX-20 and -40 only) To create proper mating between the cam latch (#5-6)
and the shoulder on the worm gear, ensure cam latch is positioned below the worm gear
shoulder (see Picture 5a).
TIP: (MX-20 and -40 only) - Picture 5a shows
proper alignment between the cam latch (#5-6)
and the shoulder on the worm gear.
TIP: (MX-20 and -40 only) - Picture 5b shows
improper alignment between the cam latch
(#5-6) and the shoulder on the worm gear.
Improper alignment could cause the cam latch
to be broken off by the worm gear lug.
TIP: (MX-85, -140, and -150 only) - Picture 5c
shows proper alignment between the cam and
the clutch ring roller.
Fit the complete declutch assembly into the
actuator housing, slightly twisting if necessary,
to remount into actuator. See picture 5d.
5a
Cam Latch and
Worm Gear
Shoulder Proper
Alignment
5b Cam latch and
worm gear shoulder
improper alignment
5c
5d