Fieldpiece HG2 - HVAC Guide System Analyzer - Manual (Page 32)

62
WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.CO
Editing Technician Information
You can edit technician information in the database
by clicking on "Setup" then "Edit Technician" from the
drop-down menu.
Using the Name select drop down menu select tech-
nician from the list or Select to create a new technician.
Figure 30. Editing Technician Information.
About
Click on “About” from the Setup drop down menu
to view the About screen.
Th e latest fi rmware and soft ware will be available at
www.Fieldpiece.com .
Figure 31. About.
Problems Communicating with PC
You will be taken to the “Com Port Setup” screen
if there is any error in communicating with the HVAC
Guide
TM tester while starting the program.
Figure 32. COM Port Setup.
Reconnect the HVAC Guide TM tester, select Com
with PC press ENTER and press AUTO-Detect to re-
establish the connection with the HVAC Guide
TM tester.
You can look in the Windows Hardware Wizard to see
if the HVAC Guide
TM tester is communicating properly
with the PC and to troubleshoot the driver if it is not.
Only attempt to
manually select the
COM port if the Auto-
Detect has failed and
you are sure the meter
is connected and ready
for communication. The
COM port used can be
found in the hardware
wizard.
Click to browse for company
logo for technician.
Number of tests saved on
the HVAC Guide TM tester.