Fieldpiece SCP2 - Clog Popper - Manual

Do not make the adjustment on the Clog Popper too
tight. It will prove difficult to remove.
If you can’t insert the Clog Popper more than 16” into
the pipe, use the pipe included or cut a piece of 3/4”
schedule 40 pipe at least 18” long.
If the pipe or tubing you are trying to clear isn’t 3/4”
schedule 40, use the appropriate reducer or adapter
and the 3/4” pipe included.
If there isn’t enough room to put the Clog Popper out,
use the pipe included or cut a piece of 3/4” schedule
40 pipe at least 18” long and use a 90° or 45° fitting to
move into a different position. If the clog doesn’t move,
try the following:
A) Adjust the nut for a better fit.
B) It may be necessary to jar the clog using a
forward motion.
C) You can put some water in the end of the pipe
to help create more vacuum.
Tips