DNF Controls Universal Switch Panel (USP-8, USP-8D, & USP-16) - Manual (Page 28)

26 OF 41 Universal Switch Panel (USP) User Manual
1) Click on the GPIs button. The GPI Configuration page will be displayed.
The USP-16, USP-8A, and USP-EM-16 will display 16 GPIs. The USP-8 will
display 8 GPIs.
2) Click on the drop down arrow in each column to view the list of available
options/ values. Select the desired option/ value by clicking on it.
3) Click in the User Defined ON State column and select the ON state for the
GPI.
4) Click in the User Defined ON Mode column and select the operating mode for
the GPI.
5) Click in the Debounce column and select the debounce time for this GPI. (The
selected time is multiplied by 10 milliseconds to compute the actual Debounce
time.) Debounce time is the time period that the GPI must remain on to be
detected as ON.
6) Repeat steps 3 - 5 to configure each GPI.
7) Click on the Save button to save changes. Changes will take effect
immediately after saving.
OR,
Click on any other page button to exit without saving changes.