DNF Controls Universal Switch Panel (USP-8, USP-8D, & USP-16) - Manual (Page 21)

Universal Switch Panel (USP) User Manual 19 OF 41
10) Click on the Save button to save changes. Changes will take effect
immediately after saving.
OR,
Click on any other page button to exit without saving changes.
E. EXTENDED TALLY CONFIGURATION
Use this page to configure the operation of the Extended Tally functionality. Each
key may be controlled by 5 Combinatorial Logic events on a remote GTP-
32/DC20. Combinatorial Logic on the remote unit is required to work with
Extended Tallies.
NOTE: Extended Tally is a feature of the USP-ET software. It is not contained
within the standard USP. Extended Tally replaces the Alarm Mode functionality
when installed.
Extended Tally Table Parameters
Parameter Description
Event Label Name of the Combinatorial Logic event being monitored on the remote
GTP-32/DC20.
Text Text to be displayed on key when remote event turns ON.
Font Text to be displayed on key when remote event turns ON.
Color Text to be displayed on key when remote event turns ON.
1) Click on the Extended Tally button. The Extended Tally page will be
displayed.