DNF Controls Universal Switch Panel (USP-8, USP-8D, & USP-16) - Manual (Page 13)

Universal Switch Panel (USP) User Manual 11 OF 41
2. UNIVERSAL SWITCH PANEL CONFIGURATION
The Universal Switch Panel is configured using an off-the-shelf web browser such as
Internet Explorer, Netscape, Fire Fox, or other commonly available browser. Using a
web browser running on a computer, enter the USP’s IP address to connect to the USP’s
web server to view and modify configuration web pages.
The default IP address is: 192.168.10.217
The default Gateway is: 0.0.0.0
The default Mask is: 255.255.255.0
HOME Page
A. REMOTE DEVICE ASSIGNMENT
Use this page to identify the remote Universal Switch Panels, GTP-32 GPI
Tally Processors, or other devices that the local USP will communicate
with. If the USP will operate standalone, this page may be left blank.
Remote Device Assignment Table Parameters
Parameters Description
Device
Description
Enter a unique device description/ identifier, up to 32 characters in length,
that clearly identifies the remote device. This description/ identifier will
appear in the remote device list that is used on the other configuration
pages.
IP Address Enter the IP Address for the remote device.
Heartbeat Rate
A heartbeat is sent to the remote device to confirm that it is alive. If the
remote device does not respond to three sequential heartbeats, the USP
will show a communication error.
Select a heartbeat time period. For local LAN, use a small value. For WAN
or internet use a larger value.