DNF Controls Universal Switch Panel (USP-8, USP-8D, & USP-16) User Manual
Page 20
18 OF 41 Universal Switch Panel (USP) User Manual
1) Click on the Alarm Assignment Button. The Alarm Assignment Page will be
displayed.
2) Click on the drop down arrow in each column to view the list of available
options/ values. Select the desired option/ value by clicking on it.
3) Click in the Alarm# column and select the alarm group number for this tally.
4) Click in the Priority column and select the priority, within the alarm group, for
this tally.
5) Click in the Source Type column and select the tally source.
6)
For Source Type= Local GPI:
Click in the Source Value column and select the GPI or GPO to tally.
OR, for Source Type= Remote GPI, Remote GPO:
a) Click in the Remote Device column and select the Remote Device
Description for the remote device to tally.
b) Click in the Source Value column and select the GPI or GPO to tally.
OR, for Source Type= GTP32/DC20:
a) Click in the Remote Device column and select the Remote Device
Description for the remote device to tally.
b) Click in the Label column and enter the GTP-32 or DC20 event label.
Event Label spelling must match the event label on the remote GTP-
32/DC20.
7) Click in the ON Text field and enter the text that will appear on the front
panel switch face when the tally is on.
8) Click in the ON Color column and select the ON Text backlight color.
9) Repeat steps 3 – 8 for each tally assigned to an alarm group. A total of 32
tallies can be assigned to alarm groups.