DNF Controls 2034CL-N-PBIO - Manual (Page 9)

9 2034CL-N, 300 Clip Instant Access System, NATIVE Protocol with PBIO Option
4. LOADING A CLIP
a.
Select a VTR by pressing VTR [1], VTR [2] or VTR [3].
b.
Press [CLIP LIST] to view the list of Clips that exist in the VIDEO SERVER.
The CLIP LIST indicator comes on.
The display now shows:
c.
Turn the Wheel.
The top line of the display will show:
(“xxxxxxxx” is the eight character CLIP ID)
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIP IDs.
OR
Enter the ID (if a clip has one) from the numeric keypad.
d. Press
[LOAD] to load the current CLIP ID shown on the top line of the display.
e.
Locate the clip to the desired IN time.
5. CAPTURE FUNCTION
a. SETTING AN IN (OUT) POINT
1)
Locate the clip to the desired IN (OUT) time.
2) Press
[IN] ([OUT]).
The IN (OUT) indicator comes on.
b. CLEARING AN IN (OUT) POINT
Press and hold [DEL], then press and release [IN] ([OUT]).
The IN (OUT) indicator goes out.
c. GANGING CLIPS WITH PREVIOUSLY SET IN POINTS
If a gang is established with the master having an IN point, the gang relationship will be
relative to the master IN point and all slave IN points will be overwritten.
Create New Clip?
LOAD=OK WHEEL=Next
XXXXXXXX LOAD=OK
ENTER ID: