DNF Controls 2034CL-N-PBIO - Manual (Page 26)

26 2034CL-N, 300 Clip Instant Access System, NATIVE Protocol with PBIO Option
c. CONNECTION AND CHANNEL ASSIGNMENTS
1) Press [MENU] to enter Menu Mode.
2) Turn Wheel until “Press VTR key for CH and CN assignments” is displayed.
3) Press VTR [1] key.
NOTE: VTR [X] toggles between CH and CN assignments
4) “VTR 1 Connection” is displayed on the top line.
The bottom line of the display shows “CHA CHB CHC >>> OFF”
5) Press the keys under these selections to choose a channel. Select “>>>” to view
more channels.
6) Repeat steps 3-5 for VTRs 2, 3 and 4.
7) Press [ESC] at any time to exit menu mode.
NOTE: Set all unused VTR Connections and Channels to OFF.