Daktronics Track & Field Interfaces - Manual (Page 23)

Hy-Tek Track & Field Meet Manager 17
5. Go to Interfaces > Scoreboard - Daktronics Fixed Digit > Open/Close Serial Port
(Figure 24).
6. For the Scoreboard (1-16) option (Figure 25), select the COM port number on the Hy-
Tek computer that will output Standard RTD, and then click OK.
7. Go to Interfaces > Scoreboard – Daktronics Fixed Digit > Customize (Figure 26).
 Set the Number of Lanes on Board
to the number of competitors
that will be shown on one frame
of the sequence.
 Set the Baud Rate to 19200.
Note: Some older systems using
the Fixed Digit output were set
to “9600” baud.
 All other settings are the user’s
preference.
Figure 24: Open/Close Serial Port
Figure 25: Serial Port for Daktronics Fixed Digit
Figure 26: Customize Daktronics Fixed Digit