Daktronics Track & Field Interfaces User Manual
Page 20
14
Hy-Tek Track & Field Meet Manager
6. For the Scoreboard (1-16) option (Figure 17), select the COM port number on the Hy-
Tek computer that will output Standard RTD, and then click OK.
7. Go to Interfaces > Scoreboard – Daktronics Full Matrix > Customize (Figure 18).
Set the Number of Bulbs Vertically
(Rows) to the appropriate value.
Calculate by multiplying the
number of lines in the sequence
by 8. Example: 6*8=48.
Set the Number of Bulbs
Horizontally (Columns) to the
appropriate value. Calculate by
multiplying the number of
characters per line in the
sequence by 6. Example:
24*6=144.
Set the Number of Bulbs Between
Lines to “1”.
Note: Refer to the Daktronics
Fixed Width Font Calculator
(DD2000695) for an interactive
spreadsheet that can help
determine the above values.
Set the Font Size to 7x5.
Set the Baud Rate to 19200.
All other settings are the user’s preference.
Figure 17: Serial Port for Daktronics Full Matrix
Figure 18: Customize Daktronics Full Matrix