Daktronics Track & Field Interfaces - Manual (Page 15)

FinishLynx Photo Finish System 9
 Stop Bits: 1.0
 Running Time: Normal
 Auto Break: Off
 Results: Off
 Paging enabled; Size “1”; Time “8.0”
2.7 TR-3101 Setup
1. Identify which serial port
will control the display.
2. Connect the signal converter
kit (part # 0A-1125-0007) to
a serial port from
FinishLynx to the input jack
on the display.
3. Set up the scoreboard
options on the FinishLynx
computer as follows (refer
also to Figure 12):
 Script: “DakTR-3101.lss”
 Name: “Scoreboard”
 Code Set: Single Byte
 Serial Port: Select an
available COM port.
Note: If connecting to the serial port on the connection box, select Camera.
 Baud: 19200
 Data Bits: 8
 Parity: None
 Stop Bits: 1.0
 Running Time: Normal
 Auto Break: Off
 Results: Auto
 Paging enabled; Size “1”; Time “3.0”
Figure 12: Scoreboard Options for TR-3101