Daktronics Track & Field Interfaces - Manual (Page 21)

Hy-Tek Track & Field Meet Manager 15
3.2 Daktronics Small Matrix Setup
Requires that the RTD sequence has 3 lines of 10 or more characters per line.
1. Open the Meet Manager program.
2. Click Run on the main menu.
3. Go to Interface > Setup > Scoreboard (Figure 19).
4. Select Daktronics Small Matrix and click OK.
5. Go to Interfaces > Scoreboard - Daktronics Small Matrix > Open/Close Serial Port
(Figure 20).
6. For the Scoreboard (1-16) option (Figure 21), select the COM port number on the Hy-
Tek computer that will output Standard RTD, and then click OK.
Figure 19: Scoreboard Vendor Selection
Figure 20: Open/Close Serial Port
Figure 21: Serial Port for Daktronics Small Matrix