Daktronics Venus 1500 Ver 3.x - Manual (Page 107)

The Venus 1500 Message Studio
Tutorial 93
15.
Click on the last down arrow to the right and select an effect for the exit.
16. At this point leave the duration at 2.0 seconds to see the effects clearly.
17. Preview the frame . To change the frame’s enter, hold, and exit effects rate, stop the
preview and change the timing in the Frame Duration box right below the graphic
frame.
18.
Save the message.
1.
Open a New message from the File menu.
2.
Activate a new graphic frame .
3.
Activate the text frame opened by default and delete it .
4.
Click on the True Type font button and then inside the graphic frame to open
the writing box.
5.
Type in the desired text with center alignment.
6. Close the writing box.
7.
Center the text object in the frame from the Object menu.
8.
Click outside the object area and click on the Fill tool .
9.
Click on the down arrow and select blue from Fill tool the color palette .
10.
Click inside the frame to paint the frame with the selected color.
11. Add another graphic frame.
12. Activate the True Type font and type the desired text.
13.
Center the box in the frame.
14.
Change the background to a different color from the previous frame.
15.
Add the last graphic frame.
Figure 123: Entry Effect Example