Cybex 770T Treadmill - Manual (Page 72)

Cybex Owner’s Manual
71 72
10. If replacing the running deck, tap the Deck icon, then tap the New Deck Reset icon to reset
odometer.
11. Exit Set Up Mode by tapping the Toolbox ico n , then tap the Home icon . The screen
will refresh.
First 500 miles (800 km).
• Check running belt tension and tracking.
Every 5,000 miles (8,000 km).
• Check running belt tension and tracking.
• Vacuum the fan and heat sink area of the motor controller.
• Move treadmill and vacuum underneath.
• Raise elevation to 15%, carefully roll the treadmill backwards to clean underneath with a dry cloth
and vacuum. Return to normal position when done.
Every 15,000 miles (24,140 km).
• Replace running belt and flip deck.
• Check elevation assembly and replace worn parts.
• Lubricate elevation pivot points.
Every 30,000 miles (48,280 km).
• Replace running belt and deck.