Cybex 770T Treadmill - Manual (Page 20)

Cybex Owner’s Manual
20
8. Adjust the power cord length exiting the rear of the frame. Store extra power cord behind lower
cover.
9. Install the right top step by placing in position and inserting a long 3/8” drive socket extension
into the right top step.
2
1
Item Description
1 3/8” Drive Socket Extension
2 Right Top Step
10. Pry the long 3/8” drive socket extension forwards to secure the right top step.
11. Using a Phillips screwdriver, install the two screws securing the right end cap.
Install the uprights
1. Install the short and long standoffs to the right side of the base using a 3/4” open end wrench.
1
2
3 4
Item Description
1 17 Standoff, short
2 18 Standoff, long
3 Base
4 Front of unit
2. Thread two bolts into the base by hand. Do not fully thread bolts into the base.
3
1
2
Item Description
1 4 Upright (Right shown)
2 Base
3 16 Bolt, Whiz lock (2)
3. Place the right upright onto the base assembly and the bolts installed in the previous step.