Cybex 770T Treadmill - Manual (Page 30)

Cybex Owner’s Manual
30
Initial setup
Initial setup only occurs during the installation of the unit. Once complete, refer to Setup Options
below.
CYBEX
LOGO
Press and hold Cybex logo for 6 seconds to access Screen
Lock and Toolbox. See Preventive Maintenance section.
ENGLISH
LANGUAGE
ICON
Press and hold language logo for 6 seconds to access
Screen Lock and Toolbox.
1. Press the Access Toolbox icon to display the Access to Toolbox login screen.
2. Enter the sequence: .
3. Press the Setup icon to display the setup menu.
4. Tap the Time icon to advance to the Set the Time screen.
5. Adjust the time if needed, then tap the ENTER icon .
6. Tap the Date icon to advance to the Set the Date screen.
7. Adjust the date if needed, then tap the ENTER icon .
8. Tap the Units & Power icon to select the Set units preference screen.
9. Select the unit preferences from the following options:
Record your actual line voltage here. Line frequency is usually specific to your country or location.
Distance Units Weight Units Line Frequency Line Voltage
Miles Lbs. 50 Hz 110v
Km Kg 60 Hz 115v
Stone 208v
220v
230v
Exit Set Up Mode by tapping the Toolbox ico n , then tap the Home icon . The screen will
refresh.