Cybex 770T Treadmill - Manual (Page 24)

Cybex Owner’s Manual
24
Install optional A/V or CSAFE cables
1. Insert the CSAFE coupler into the mounting plate by hooking the lower tab into the mounting
plate and snapping in the upper tab.
2
1
4
3
5
6
Item Description
1 Upper tab
2 Mounting plate
3 6 CSAFE coupler
4 Lower tab
5 Installed
6 Front of unit
2. Unthread the nut at the end of the A/V cable.
1
2
Item Description
1 A/V cable
2 Nut
3. Insert the A/V cable into the D-shaped hole in the mounting plate on the front of the unit.
5
6
3
4
1
2
Item Description
1 A/V cable hole
2 6 CSAFE coupler
3 Nut
4 Mounting plate
5 A/V cable
6 CSAFE cable, Red
4. Thread the nut removed in step 2 onto the A/V cable by hand.
5. Install the A/V cable to the mounting plate on the front of the unit using a 14 mm open end
wrench.
6. Plug the CSAFE cable into the CSAFE coupler on the front of the unit.